BWQML - 724.14 PREST-O-CEL W/PSA COATING FOAM INSULATING TAPE

  • MSDS: BWQML
  • Manufacturer: PRECISIONAIRE INC
  • Product Name: 724.14 PREST-O-CEL W/PSA COATING FOAM INSULATING TAPE
  • National Stock Number: 9320-00N057301
Product Identification

Product ID:724.14 PREST-O-CEL W/PSA COATING FOAM INSULATING TAPE
MSDS Date:04/01/1989
FSC:9320
NIIN:00N057301
MSDS Number: BWQML

Responsible Party
PRECISIONAIRE INC
2399 26TH AVE NORTH
ST PETERSBURG, FL 33713
US

Emergency Phone: 813-822-4411; 800-255-3924

Info Phone: 813-822-4411

Preparer: WILLIAM BANTON

Cage: 8W008

Contractor
PRECISIONAIRE INC
ST PETERSBURG, FL 33734 US

Telephone: 813-822-4411

Cage: 8W008

Ingredients

PREST-O-CEL (SPONGE RUBBER PRODUCT CONTAINS INGREDIENTS 2 -

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K


SYNTHETIC POLYMERS (NON HAZARDOUS)

OSHA PEL N/K

ACGIH TLV: N/K


FILLERS (NON HAZARDOUS)

OSHA PEL N/K

ACGIH TLV: N/K


PLASTICIZERS (NON HAZARDOUS)

OSHA PEL N/K

ACGIH TLV: N/K


RUBBER; (RUBBER CHEMICAL) (NON HAZARDOUS)

OSHA PEL N/K

ACGIH TLV: N/K


POLYMER; (POLYMER MATRIX) (BINDING INGS 2 - 5) (NON

OSHA PEL N/K

ACGIH TLV: N/K


PSA COATING (CONSISTS OF INGS 8 & 9) (NON HAZARDOUS)

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K


SYNTHETIC RUBBER; (SYNTHETIC RUBBER BASED PRESSURE

OSHA PEL N/K

ACGIH TLV: N/K


NON-HAZARDOUS INGREDIENT; (PAPER RELEASE LINER)

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO SIGNIFICANT SIGNS OF ANY ADVERSE
HEALTH HAZARDS ARE EXPECTED TO OCCUR AS A RESULT OF INHALATION
EXPOSURE, EYE OR SKIN CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:NOT REQUIRED UNDER NORMAL INDUSTRIAL USE. INGEST:CALL MD
IMMEDIATELY . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINI
MUM OF 15 MINUTES, SEEK ASSISTANCE FROMMD . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD .

Fire Fighting

Flash Point:>230F,>110C
Extinguishing Media:CARBON DIOXIDE, ABC DRY CHEMICAL, WATER SPRAY OR
FOG & FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DO NOT BREATHE FUMES.
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS.

Accidental Release

Spill Release Procedures:RECOVER SPILLED MATERIAL & PLACE IN AN
APPROPRIATE CONTAINER FOR REUSE OR DISPOSAL. UTILIZE RECOMMENDED
PROTECTIVE CLOTHING & EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT BREATHE DECOMPOSITION PRODUCTS.
AVOID SKIN CONTACT. STORE IN A COOL, DRY PLACE. ROTATE STOCK.
Other Precautions:DO NOT HANDLE UNTIL MFR'S SAFETY PRECAUTIONS HAVE
BEEN READ & UNDERSTOOD. FOR INDUSTRIAL USE ONLY!

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
SELF-CONTAINED BREATHING APPARATUS REQUIRED IF EXPOSURE TO
DECOMPOSITION PRODUCTS IS LIKELY.
Ventilation:GENERAL DILUTION VENTILATION - 9000 CFM DILUTION AIR.
Protective Gloves:RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH & SAFETY SHOWER SHOULD ALWAYS BE
NEARBY.
Work Hygienic Practices:AS W/USE OF ANY CHEMICAL COMPOUND, WASH HANDS
BEFORE EATING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK SPONGE RUBBER W/CLEAR PRESSURE SENSITIVE
COATING; MILD SWEET ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
HYDROCARBONS & SMOKE.

Disposal

Waste Disposal Methods:WASTE MATL MAY BE DISPOSED OF IN AN APPROVED
LANDFILL OR INCINERATED UNDER CONDITIONS WHICH MEET FEDERAL, STATE
& LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.